Avid Technology digi 1 Manuel D’Utilisation
Chapter 4: Connecting Your Studio
25
chapter 4
Connecting Your Studio
This chapter explains how to connect your Digi 001 to a mixer, amplification system,
digital recorders, and other studio devices, and how to connect audio sources for recording.
digital recorders, and other studio devices, and how to connect audio sources for recording.
Digi 001 I/O Box Inputs and Outputs
All Digi 001 inputs and outputs are factory calibrated for 14 dB of headroom below 0 dB, or
full code. This means at the nominal reference input level (+4 dBu or –10 dBV) you can
have up 14 dB of headroom before input or output clipping occurs.
full code. This means at the nominal reference input level (+4 dBu or –10 dBV) you can
have up 14 dB of headroom before input or output clipping occurs.
Connectors on the Digi 001 I/O Box Front Panel
Mic/Line Inputs 1 and 2
These balanced/unbalanced inputs are designed for microphones or line-level inputs (with
the –26 dB pad). They accept XLR or 1/4" analog audio input connections.
the –26 dB pad). They accept XLR or 1/4" analog audio input connections.
–26 dB Pads 1 and 2
These switches allow you accommodate line-level signals on Mic/Line Input 1 and 2 by
reducing input sensitivity by –26 dB.
reducing input sensitivity by –26 dB.
Input Gain 1 and 2
These controls adjust the input gain of Mic/Line inputs 1 and 2.
Mic/Line input 1
with preamp
48V phantom
power
–26 dB
pad
input
gain
gain
phantom power
Monitor Mode
switch
monitor
volume
headphone
gain
headphone
output
indicator
Mic/Line input 2
with preamp
–26 dB
pad
input
gain
gain
power on
indicator