Pioneer 502mx Manuel D’Utilisation
102
Menu Mode
6) Setting the input signal format
INPUT 3 and 4 support RGB and two component video signal types. Thus, you must make the appropriate setting for
the particular component.
This setting needs to be made separately for INPUT 3 and 4, as described below.
(Examples)
• To reproduce RGB signals
= SIGNAL : RGB
• To reproduce HDTV equipments
= SIGNAL : COMPONENT 1
• To reproduce DVD players
= SIGNAL : COMPONENT 2
SCREEN
MAIN MENU
ALL RESET
PICTURE
POWER SAVE
3SET UP
BRIGHT
: 0
COLOR
: 0
TINT
: 0
SHARP
: 0
RESET
SET : NEXT
CONTRAST : 0
MENU : MENU OFF
5∞
3
: SELECT
SET UP
SET : CHANGE
EXIT
5∞
3
: SELECT
SETTING
: VIDEO
3SIGNAL
: RGB
TERMINAL
: BNC
CLAMP
: MODE 1
HIGH CONTRAST : OFF
1 Select SETUP.
Screen
1
2 Move the cursor to SIGNAL and change the
setting using the SET button.
Pressing the SET button moves the settings
through the sequence RGB
=COMPONENT
1
=COMPONENT 2···.
Screen
2
Set-able condition
: When reproducing video signals (other than
PC signals) via INPUT 3 or 4. (For PC signals,
input setting is RGB.)
Factory preset
: INPUT 3 : RGB
INPUT 4 : RGB