Scag Power Equipment STHM Manuel D’Utilisation

Hydraulic fluid is under high pressure.  Keep
body and hands away from pinholes or nozzles that
eject hydraulic fluid under high pressure.  If you need
service on your hydraulic system, please see your
authorized Scag dealer.  If hydraulic fluid is injected
into the skin, it must be surgically removed within a
few hours by a doctor or gangrene may result.

1. Check the belts for proper tension at 2, 4 and 8

hours.  Adjust as needed.  (See Belt Tension,
page 9).

2. Check the neutral adjustment. (See Adjust-

ments, page 8)

3. Check the tires for proper pressure.

Caster Wheels

Flat Free

Drive Wheels

12 psi

Rear Steering Wheel

15 psi

4. Check for loose hardware.  Tighten as needed.

5. Check the safety switches for proper adjustment:

* The engine should crank and start if the

machine is in neutral, the PTO engagement
switch is OFF and the parking brake is ON.

7. Apply lubricant to all the grease fittings.  Lubricant

was applied at the factory.  This is just a precaution-
ary check to make sure that all the fittings have been
lubricated.