SATO CX200 Manuel D’Utilisation

29

Rev B

SATO America printers need very little maintenance other than occasional

cleaning.  Clean the printer body as required, using a soft cloth moistened with

a mild detergent cleaner.

1.

Lift open the top case.

2.

Press the two print head releases toward the rear of the printer to unlock the

print head.  The print head will pop up slightly.  Lift it up until it is fully

raised and latched in the up position.

3.

Using a SATO Direct Thermal Print Head Cleaning Sheet or a soft coth

moistened with 99% pure isopropyl or denatured alcohol, clean all dirt and

label residue from the print head, paying particular attention to the "burn

line" (the thin black line near the front edge of the print head).

4.

Wipe the platen roller with a cleaning cloth.  To reach all portions of the

platen roller, press the FEED button.  The roller will rotate 1/4 turn each

time you  press the FEED button.

Do not clean the print head or platen roller using abrasive or

metallic objects or ammonia-based cleaners or other harsh

chemicals.  These practices can cause serious damage and

will void the warranty.

Keep all objects clear of the platen roller when you press the FEED button.

Clean the print head if it appears dirty or if print quality is poor.

To clean the print head:

Do not use abrasives on the printer body.  The finish may be ruined.