SATO CX200 Manuel D’Utilisation

33

Rev B

Some of the components in the printer are extremely sensitive to static discharge

damage.  When servicing the printer, observe good static prevention practices.

• Place the printer on a grounded, conductive work surface.

• Ground yourself to the work surface through a 1 megohm series resistor, using a

conductive wrist strap or other suitable device.

• Ground any tools that will contact the equipment (holding the conductive portion

of the tools can provide a suitable ground).

• Keep replacement components in their protective packing until they are needed,

and do not handle unnecessrily.

After repairs are completed:
After making the necessary repairs, reconnect the printer power supply and reinstall

the print media.  Confirm that the printer status LED glows green, and that the

printer will feed a label when you press the FEED button.