SATO CX200 Manuel D’Utilisation
3
Rev B
SATO SERVICE MANUAL
CX Series Printers
1-3 Specifications
Model
CX200DT/CX200TT
Print Method
Direct Thermal/Thermal Transfer
Resolution
203 dpi
8 dpmm
Max. Media Width
4.65 inches 118 mm
Min Media Width
2.0 inches
51 mm
Max. Print Width
4.1 inches
104 mm
Max. Print Length
14 inches
356 mm
Max. Print Speed
3 ips
76 mm/s
Installed RAM
512 KB, non-volatile
Installed ROM
512 KB, Flash
Communications
RS232C Serial and Centronics Parallel
Max. Media Roll OD
5.0 inches
127 mm
Ribbon
460 feet (140m) Wax, Wax/Resin
418 feet (127m) Resin
0.5 inch core, Coated Side Out
Label Sensing method
Eye-Mark, Gap or Notch, Fixed Position
Minimum Form Length
0.375 inches 9.5 mm
Text Fonts
12 proportional and monospaced fonts up to 12X expansion
Graphics
PCX and SATO Hex/Binary
Bar Codes
UPC-A/E, EAN-8/13, UCC/EAN-128, Bookland, Code 39,
I 2 of 5, Code 128, Codabar, Plessey, MSI, Code 93,
Postnet, PDF417, Maxicode
I 2 of 5, Code 128, Codabar, Plessey, MSI, Code 93,
Postnet, PDF417, Maxicode
Rotation
Text and bar codes can be rotated in four 90
o
increments
Power
20-26 VAC 50/60 Hz or 18-26 VDC
120 VAC 50/60 Hz
230 VAC 50/60 Hz
40 W power supply provided with printer
120 VAC 50/60 Hz
230 VAC 50/60 Hz
40 W power supply provided with printer
Environmental
Operating:
41
o
to 104
o
F (5
o
to 40
o
C)
Storage:
- 4
o
to 122
o
F (-20
o
to 50
o
C)
RH:
25 to 85% non-condensing
SECTION 1 - GENERAL INFORMATION