Technicolor - Thomson dth8005 Manuel D’Utilisation

Page de 60
Connections and initial set up
7
EN
EN
Manual channel search
If you want to set up a new channel, use the manual search procedure which will enable you to
add a channel to the ones already set-up on your DTH 8005.The channels already stored will not
be deleted. During the initial installation, if you carried out the automatic installation described on
page 5, you do not need to carry out the steps shown on 7 and 8.
1.
If the main menu is not displayed, press the 
MENU
key.
2.
Select the Setup line using the 
or 
keys, and press 
OK
to validate.
3.
Select the Installation line using the 
or 
keys, and press 
OK
to validate.
4.
Select the Manual Search line using the 
or 
keys, and press 
OK
to validate.
5.
Select your country of residence using the 
or 
keys on the remote control, and press
OK
.
A set-up window will appear.The Standard line is highlighted.
6.
Select your country’s TV standard using the 
key.
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL’) for France,
EURO BG (BGH) for Western Europe.
DKK’ for Eastern Europe.
for the United Kingdom.
7.
Select the Reception line using the 
or 
keys, and use the 
key to choose the type
of antenna.
Reception through external antenna: select Antenna (Ch).
Cable reception: select Cable (Ca).
8.
Select the Channel line using the 
or 
keys.
9.
Press
PR+
to start the Manual search.
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.: Ch 06).
If the channel is encoded, press 
AV
to display the pictogram 
next to the channel number. In
this case, plug a decoder into the blue AV2 connector of the DTH 8005.
If the picture is poor, select Fine Tuning using 
or 
and adjust with 
PR+
or 
PR-
.
10.
When the picture and sound of the channel are good, select the line Save using 
or 
,
and assign a channel number with 
PR+
or 
PR-
or the 
number 
keys. Press 
OK
to store the
number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press 
MENU
to exit the manual set-up.
2_DTH8005_en  9/03/04  17:20  Page 7