Aleratec 330107 Manuel D’Utilisation

www.aleratec.com

28

Startup Menu allows you to select which function displays first when the USB 

Duplicator is turned on. 

This function selects the menu item that will be the first item shown on the 

display when you turn on the duplicator. The default setting is Copy.

1.  Use the UP or DOWN arrow to scroll through the menu until Setup is 

displayed on the LCD screen. Press OK. 

2.  Use the UP or Down arrow to scroll through the Setup options until Startup 

Menu is displayed on the LCD screen. 

This function supports the selection of Quick Copy or Copy whole area of the 

source.

7.2.1  Only Data area – Quick Copy

 

If the controller system can verify FAT 16, 32, NTFS, Linux Ext 2, Ext 

3 format for the source, the system will copy just the data area when 

this function is selected. If it cannot verify the format, the system will 

automatically copy the whole area of the source. For example, if a 2GB 

source is FAT 32 and it has 50MB of data, the system will copy only the 

50MB of data. 

7.2.2  Whole area – Controller will copy whole area of the source.

 

If the source is not FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format, the 

system will copy the entire media, even the blank area. When this function 

is selected, Quick Copy will not be used. The copy process takes longer. 











