Tascam DP-02 Manuel D’Utilisation
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF
2 – Advanced techniques
Before you start, make sure that you have selected the
partition containing the song to which you want to import
the track, and that the song is loaded.
partition containing the song to which you want to import
the track, and that the song is loaded.
1. Connect the unit to the PC, and “open” the record-
ing media (““Open” and “Close”” on page 43).
2. Use the PC operating system to copy the WAVE file
from the PC to the WAVE directory of the unit
’s
FAT partition.
3. “Close” the unit.
4. Press
MENU
and select the
WAVE
menu.
5. Select the
IMPORT TRACK
action and press the
¥
cursor or
YES/ENTER
key.
The display shows the song archive files on the FAT
partition:
partition:
NOTE
Although shorter file names are shown with spaces on
the unit display, the actual file names on disk do not
contain these spaces.
the unit display, the actual file names on disk do not
contain these spaces.
Importing a track
Importing and exporting tracks
You can import and export individual tracks to and from
a PC via the FAT partition. The files used for track import
and export are 16-bit 44.1kHz mono WAV format (and
a PC via the FAT partition. The files used for track import
and export are 16-bit 44.1kHz mono WAV format (and
must have the .WAV extension). Audio in other formats
intended for import must be converted before they can be
imported to the unit.
intended for import must be converted before they can be
imported to the unit.
This is basically the reverse of the backup process, allow-
ing you to transfer a song archive from a PC to the unit.
ing you to transfer a song archive from a PC to the unit.
1. Connect the unit to the PC using the USB cable, and
“open” the recording media (““Open” and “Close””
on page 43).
on page 43).
2. Use the PC operating system to copy the song
archive from the PC to the BACKUP directory of
the unit FAT partition.
the unit FAT partition.
3. “Close” the unit.
4. Press
MENU
and select the
DATA BACKUP
menu.
NOTE
If there are no song archive files on the FAT partition,
a message is shown.
a message is shown.
5. Select the
SONG RESTORE
action and press the
¥
cursor or
YES/ENTER
key key.
The display shows the song archive files on the FAT
partition
partition
NOTE
Although the unit displays shorter file names with
spaces at the end of the name, these spaces are not
part of the actual file name.
spaces at the end of the name, these spaces are not
part of the actual file name.
6. Select a song archive using the
DATA dial
and press
YES/ENTER
. The current song is saved.
7. The “real” song name is extracted from the archive
and shown:
8. Press
YES/ENTER
to load the archived song as the
current song. Appropriate messages are shown if
there is not enough disk space, etc.
there is not enough disk space, etc.
Restoring a song