Epson progression u11 Manuel D’Utilisation

Note

You can use the commands listed above while you are

running a program. However, if the program uses one of

these commands for another function, you cannot use it to

change the processor speed. For example, if you are running

a program that uses the

command to move

the cursor, you cannot enter

to change the

processor speed to low. Another alternative is to use the

ESPEED program, described below.

The speed setting remains in effect until you do the following:

Press

or the RESET button

Turn off the computer

Change it using the SETUP program

Change it with another keyboard command

Change it using ESPEED.

Using the ESPEED Program

ESPEED provides an easy way to change the processor speed if

your application program does not recognize the

key

commands or

if you want

to include the program command in

a batch file.

The ESPEED program is on the Reference diskette. If you

have

hard disk drive, copy the file ESPEED,EXE from your

Reference diskette

onto

your hard disk and run the program

from there. If you do not have a hard disk, insert your

Reference diskette in drive A and log onto drive A before you

enter the command to start the program.

1-32

Using Your Computer