Epson stylus color 1160 Manuel D’Utilisation

Make sure the 

Copies

 settings 

in the printer software and your 
application aren’t both set for 
multiple copies.

■

If the paper doesn’t eject fully, you 
may have set the wrong paper size. 
Press the 

 

E load/eject button to 

eject the paper. Then select the 
correct paper size in your 
application or printer software.

■

If it’s wrinkled when it ejects, the 
paper may be damp or too thin.

Remove the stack of paper from the 
sheet feeder. Check that the paper:

■

Isn’t curled or creased

■

Isn’t too old

■

Isn’t loaded above the arrow on 
the left edge guide

■

Isn’t jammed inside the printer. 
(If the 

 

S paper out light is 

flashing, paper is jammed.)

When you reload the paper, make 
sure the left edge guide fits the paper, 
but not too tightly.

Turn off your printer, open the 
cover, and remove all the paper 
that’s inside, including any small 
pieces that may have torn off. 

If your paper jams frequently:

■

Use smooth, high-quality paper, 
loaded printable side up.

■

Fan the stack and then even the 
edges before loading it.

■

Don’t load paper above the arrow 
mark on the left edge guide.

■

Place the paper against the right 
edge guide and slide the left edge 
guide against your paper.

Remove the stack of paper from the 
printer. Then:

■

Make sure the paper isn’t too thin. 

■

Fan the edges of the stack of paper 
to separate the sheets.

■

Reload the paper as described on 
page 14.

■

Make sure the edge guides fit 
against the paper, but not too 
tightly.