Tally Genicom 6600 Manuel D’Utilisation
56
Chapter
3
Form Drawing
d
Additional horizontal positioning of the first vertical
line in dot columns, ranging from 0 to 9.
line in dot columns, ranging from 0 to 9.
t
Thickness of the first vertical line in dot columns,
ranging from 1 to 9.
ranging from 1 to 9.
...
Represents a repeat of the llldt command for each
additional vertical line to be printed. The distance
between each vertical line is additive, i.e., each
additional vertical line is placed relative to the
previous line, not from the left margin.
additional vertical line to be printed. The distance
between each vertical line is additive, i.e., each
additional vertical line is placed relative to the
previous line, not from the left margin.
^G
Command Terminator
Example 1: The Graphics Pass ^LF03000150110050010100101003^G prints
the following box and vertical lines.
^LF
The Form command
0300
Horizontal box dimension of 3.0 inches with no
additional dot columns.
additional dot columns.
0150
Vertical box dimension of 1.5 inches with no
additional dot rows.
additional dot rows.
1
Thickness of each horizontal border is 1 dot row.
1
Thickness of each vertical border is 1 dot column.
005
First vertical line is positioned 0.5 inches from left
edge of box.
edge of box.
0
No additional dot columns added to position of first
vertical line.
vertical line.
1
Thickness of the first vertical line is 1 dot column.
010
Second vertical line is positioned 1.0 inches from
the first vertical line.
the first vertical line.
0
No additional dot columns added to position of
second vertical line.
second vertical line.
1
Thickness of second vertical line is 1 dot column.
010
Third vertical line is positioned 1.0 inches from the
second vertical line.
second vertical line.
0
No additional dot columns added to position of third
vertical line.
vertical line.
3
Thickness of third vertical line is 3 dot columns.
^G
Command Terminator