Epson stylus cx7800 Manuel D’Utilisation

Epson Stylus CX7800

8

 -

 Epson Stylus CX7800

8/05

2. Open the film strip cover.

3. Slide the strip of film into the holder in the orientation 

show below with the shiny side up. (The images should not 
appear reversed.) Make sure the film slides under the tabs. 

4. Close the film strip cover. Gently press until it clicks into 

place.

5. Place the holder’s tabs into the two small holes at the left 

edge of the glass. Make sure the film strip is towards the 
back of the glass to align it with the fluorescent lamp when 
you close the document cover.

Continue with the steps below to scan and print your photos.

1. Close the document cover.

2. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch 

photo paper.

3. Press the 

 

Film/Photo

 mode button.

4. Use the l or r 

Photo/Options

 button to select one of the 

following types of film: 

❏

Negative Film

: for color negatives. 

❏

Positive Film

: for positive color film

❏

Slides

: for slides

❏

B&W Negative Film

: for black and white negatives 

Tip:
If your film is faded you can bring your photo back to life 
with color restoration. For more information, see page 9.

5. Press the x

 Start

 button. The film is scanned and a preview 

of the first photo appears on the LCD screen.

6. Press the l or r 

Photo/Options

 button to view the photos.

7. Press the u or d 

Copies

 button to select the number of 

copies to print of each photo.

8. If necessary, press the paper type button to select 

Photo 

Paper

 and the paper size button to select 

4”x 6”

 or 

5”x 7

”. 

9. Press the x 

Start

 button again. Your photos are printed. 

See below to store the film holder.

1. Open the document cover and 

remove the document mat. Pull 
up on the fastener at the top of 
the document mat. Then pull 
out the mat. 

Fluorescent lamp