Epson S1C62 Family Manuel D’Utilisation
ICE CONTROL SOFTWARE ICS62XX
VIII-90
EPSON
S1C62 FAMILY
DEVELOPMENT TOOL REFERENCE MANUAL
4 ERROR MESSAGE SUMMARY
Error message:
* COMMUNICATION ERROR OR ICE NOT READY *
Meaning:
ICE is disconnected or power is OFF.
Recovery procedure:
Switch OFF the host power supply, connect cable, and reapply power.
Or switch ON power to ICE.
Or switch ON power to ICE.
Error message:
* TARGET DOWN(1) *
Meaning:
Evaluation board is disconnected. (Check at power ON)
Recovery procedure:
Switch OFF power to ICE, and connect the evaluation board.
Then, apply power to ICE.
Then, apply power to ICE.
Error message:
* TARGET DOWN(2) *
Meaning:
Evaluation board disconnected. (Check at command execution)
Recovery procedure:
Switch OFF power to ICE, and connect the evaluation board.
Then, apply power to ICE.
Then, apply power to ICE.
Error message:
* UNDEFINED PROGRAM CODE EXIST *
Meaning:
Undefined code is detected in the program loaded from ROM.
(ICE program terminates)
(ICE program terminates)
Recovery procedure:
Convert ROM data with the S1C62XXX cross assembler,
then restart the ICE.
then restart the ICE.
Error message:
* COMMAND ERROR *
Meaning:
A miss occurs by command input.
Recovery procedure:
Reenter the proper command.
Error:
No response after power on.
Meaning:
The ICE-to-HOST cable is disconnected on the host side.
Recovery procedure:
Connect the cable.