Epson S1C62 Family Manuel D’Utilisation

After the start-up message, the following message is displayed, prompting the user to select the auto-page-
set function.

DO YOU NEED AUTO PAGE SET?(Y/N)

Press the "Y" key if selecting the auto-page-set function, or the "N" key if not selecting it.  At this stage, the
user can also return to the DOS command level by entering "CTRL" + "C" key.

■

When the program branches to another page through a branch instruction such as JP, the branch-
destination page must be set using the PSET instruction before executing the branch instruction.
The auto-page-set function automatically inserts this PSET instruction.  It checks whether the branch
instruction page is the same as the branch-destination one.  If the page is different, the function inserts
the "PSET" instruction.  If the page is the same, the function performs no operation.
Therefore, do not select the auto-page-set function if "PSET" instructions have been correctly included
in the source file.

Note

When auto-page-set is selected, there are restricted items related to source programming. See
"4.3.1 Label".

After the auto-page-set function has been selected, the following message is output, prompting the user to
select cross-reference table generation.

DO YOU NEED CROSS REFERENCE TABLE?(Y/N)

Press the "Y" key if generating the cross-reference table, or the "N" key if not generating it.  At this stage,
the user can also return to DOS command level by entering "CTRL" + "C" key.

Note

If the assembly listing file output destination (p option) is specified as Z (listing not generated) at the
start of ASM62XX, the above message is not output and the cross-reference table is not generated.

■

The cross-reference table lists the symbols and their locations in the source file, and is output at the end
of the assembly listing file in the following format:

 CROSS REFERENCE TABLE   PAGE X-  1
LABEL1  4#       29        36        ....
LABEL2  15#      40
   :     :        :

  Symbol

Number of the program statement
(# indicates the number of the statement at which the symbol was defined)

This table should be referenced during debugging.  An error such as duplicate definition of a symbol can
be easily detected.