Epson equity ie q50188015-1 Manuel D’Utilisation

2. Unpack the option card and adjust any of its switches or jumper

connections, if necessary. (For example, a memory expansion card

usually contains DIP switches that you need to set.) See the instructions

that come with the option card.

When you handle the card, be careful not to touch any of the contacts

on the circuit board, especially the gold-edged connections. If you need

to set the card down, place it on top of its original packing material with
the component side facing down.

Keep the card’s packing materials in case you remove the card later.

3. Position yourself (or the computer) so that you are on the side of the

computer with the option slots. You should be facing the gold connector

slots inside the computer.

4. Hold the card by the corners opposite the gold metal pins. Make sure

the pins point toward the connector slot and the components face up.

The card’s metal mounting bracket should be on your left.