Epson equity ie q50188015-1 Manuel D’Utilisation

Your printer manual describes solutions for most potential printer problems.

If your printer does not work correctly immediately after you install it, check
that the printer has power and is properly connected to the computer. Your
printer manual provides detailed instructions on how to connect your
printer to the computer. Also, see your software manual to make sure your

software is set up correctly for your printer.

If you have problems during printing, check the printer manual for the

printer’s correct DIP switch or control panel settings. These settings help a

printer communicate properly with the computer. You may need to make an

adjustment for your configuration.

If you install an option card and get unexpected results, check the following:

1.

Is the option card installed correctly? Check the setup and operation
procedures in both Appendix A and in the instructions that come with

the option card.

Did you set the necessary DIP switches or jumpers on the option card?

See your option card instructions for these settings.

If you used the option card to add an external device to your computer,
did you use the proper cable to connect the device to the option card
connector on the back panel?

Did you perform the necessary setup procedures for the software you are

using? If necessary, see your software manual for instructions on running
the software setup procedure.