Allied Telesis AT-8000S Manuel D’Utilisation

Page 156

  

30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.

60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.

No Refresh—Indicates that the RMON statistics are not refreshed.

Received Bytes (Octets) — Displays the number of octets received on the interface since the device was 

last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.

Received Packets — Displays the number of packets received on the interface, including bad packets, 

Multicast and broadcast packets, since the device was last refreshed.

Broadcast Packets Received — Displays the number of good broadcast packets received on the interface 

since the device was last refreshed. This number does not include Multicast packets. 

Multicast Packets Received — Displays the number of good Multicast packets received on the interface 

since the device was last refreshed.

CRC & Align Errors — Displays the number of CRC and Align errors that have occurred on the interface 

since the device was last refreshed.

Undersize Packets — Displays the number of undersized packets (less than 64 octets) received on the 

interface since the device was last refreshed.

Oversize Packets — Displays the number of oversized packets (over 1518 octets) received on the interface 

since the device was last refreshed.

Fragments — Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but 

including FCS octets) received on the interface since the device was last refreshed.

Jabbers — Displays the total number of received packets that were longer than 1518 octets. This number 

excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an 
integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field 
range to detect jabbers is between 20 ms and 150 ms.

Collisions — Displays the number of collisions received on the interface since the device was last refreshed.

Frames of xx Bytes — Displays the number of xx-byte frames received on the interface since the device 

was last refreshed.

2.

Select the Interface and the Refresh Rate. The selected interface’s RMON statistics are displayed.