Equator ez 1720 Manuel D’Utilisation

 

 

 

10 

Combo Washer-Dryer Owner’s Manual 

 

 
This appliance must be grounded. In the event of malfunction or breakdown, grounding will 
reduce the risk of electric shock by providing a path of least resistance for electric current. 
This appliance is equipped with a power cord having an equipment-grounding conductor and 
a grounding plug. The plug must be plugged into an appropriate outlet that is properly 
installed and grounded in accordance with all local codes and ordinances. 

 

WARNINGS 

- 

Improper connection of the equipment-grounding conductor can result in a risk of electric 
shock. Check with a qualified or service representative or personnel if you are in doubt 
as to whether the appliance is properly grounded. 

- 

Do not modify the plug provided with the appliance: if it will not fit the outlet, have a 
proper outlet installed by a qualified electrician. 

 

 

 
Please read the following steps carefully (Fig.3, Fig.4) 
1.  Connect the gray end of the hoses supplied to the faucet (Fig.3). 
2.  Connect two pressure-reducing valves [2] to each inlet valve [1] (see Fig.4). 
   Note: Cold water hookup is needed for drying (Ventless models only).   
3.  Connect the  white end of hoses to the pressure-reducing valve  at the  appropriate  inlet 

valve (marked “H” or “C”) (Fig.4). 

 
Connect the drain hose to a drain duct (with internal diameter of at least 1.6 inches) or place 
it for drainage in to a sink or a tub, ensuring that there are no kinks or bends. The free end 
must be at a height of 28”-36” from the floor, the hose can be held in place using the black 
plastic clamp on the upper part of the back panel (Fig.4)   

 
 
 
 
 
 
 
 
 
 

(Fig.3)   

 

 

 

 

 

 

(Fig.4)