Siemens 3000 v3.0 Manuel D’Utilisation

Some malfunctions can be resolved without outside intervention. The fol-
lowing table provides a list of such malfunctions.

No display.

Handset not switched 
on.

Press the On-hook key 
until confirmation is re-
ceived.

Battery is empty.

Charge or replace the 
battery.

No reaction to key-
stroke.

Keypad lock activated.

Press the hash key until 
confirmation is re-
ceived.

De-crescendo tone se-
quence during input.

An incorrect entry was 
made.

Repeat key sequence 
while watching the dis-
play; where applicable, 
consult the operating 
instructions.

The line "Base n" flash-
es (n= 1 - 4).

The handset is outside 
the base radio range; 
Radio signals too weak.

Come closer to the 
base radio range, 
change your position.

Handset not regis-
tered.

Register the handset.

Intervals between syn-
chronisation attempts 
are too long.

Switch off the handset 
and switch it back on 
again.

No ringer on the hand-
set.

Ringer is deactivated.

Activate ringer.

Nothing audible during 
a call.

The "R key" was 
pressed – the micro-
phone and the receiver 
inset are muted.

Press the "Delete" Dis-
play key to re-activate 
the microphone and 
the receiver inset.

The following appears 
immediately after the 
Talk key is pressed:

No dial tone available; 
No calls can be made.

Communication sys-
tem is being used by 
other users.

Repeat call later.