Sharp lc-15m4u Manuel D’Utilisation

■ Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materi-

als may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)

Drill holes measuring 0.3 in. (8 mm) in
diameter on the wall (hollow wall, plaster
board).

Insert the supplied anchors into the holes,
and strike the heads of the anchors with a
hammer until the anchors are securely
installed in the wall.

■ The supplied anchor screws are inserted in

anchors. Remove the screws from the anchors
before installation.

Position the supplied wall mount bracket in
place using the anchor screws. Tighten the
anchor screws securely.

CAUTION: • The wall mount bracket must be

installed with four anchor screws.
Be sure to thighten so that it will
not fall down under a pulling
force of at least 44 lbs (20 Kg).

• The anchors are designed for

plaster boards with a thickness
of 0.5 in. (12.5 mm). For a 0.4-
in. (9.5 mm) thickness board or a
wooden wall, find similar anchors
or screws at a hardware store.

Mount the back stand of the main unit on the
wall mount bracket with the supplied fixed
screw.

* To change the vertical angle of the

monitor, tilt the screen up to 8°
downward. Adjust the angle of the
monitor for the most comfortable
viewing.

0.3 in. (8 mm) ø

1.6 in. (40 mm)

4.3 in. (110 mm)

Anchor
(Supplied)

Anchor Screw
(Supplied)

Wall Mount
 Bracket
(Supplied)

0.5 in. (12.5 mm)

Fixed Screw (

× 1)

(Supplied)

Wall Mount Bracket (

× 1)

Anchor and Screw (

× 4)

LC-15M4U(20-28)Eng.p65

01.7.24, 5:17 PM

24