Tascam HS-4000 Manuel D’Utilisation

TASCAM HS-4000

11 – Mark and locate functions

Editing mark positions

You can change the position (time) of marks added using the
MARK list (marks named “MARKXX”).

NOTE

Automatically placed marks cannot be edited.

1. Select the mark that you want to edit on the

MARK

LIST

screen.

2. Touch the

EDIT TIME

button to open the

MARK EDIT

screen.
Touch the

FRAME EDIT

button to set whether or not the

frame value can be edited.

FRAME EDIT on

FRAME EDIT off

3. Touch a number button to edit a mark. Use the DATA

dial to change the time for the selected number.
Press the ENTER button to confirm the setting and return to
the

MARK LIST

screen.

Touch the CLEAR button to reset the input value.
・ If you begin input without selecting a digit, input will start

from the smallest one.

・ To input a specific digit, touch it to make its background

yellow, then use the number buttons or the DATA dial to
enter two digits at a time.

・ Touch the

CURRENT

▼

button to copy the current

playback position to the input value.

TIP

・ This can also be edited using an externally connected keyboard.
・ Press the keyboard’s Enter key to confirm a setting and its ESC key to

clear all the values.

Editing mark names

Select the mark that you want to edit on the

MARK LIST

screen.

Touch the

EDIT NAME

button to open the

MARK NAME

screen.

Follow the procedures in “Editing the project name” on
page 35.

メモ

You can also open the

MARK NAME

screen by touching the mark name area

on the Home Screen (in timeline mode, when the INFO display is open).
However, since the names of automatic marks cannot be edited, the

MARK

NAME

screen is not shown for them.

Mark name

If you want to input a BWF–J cue, touch the

BC$

button at

the upper right and select a cue name from the pull-down.