Sharp lc-70ud1u Manuel D’Utilisation

Troubleshooting

Problem

Possible Solution

• No power

• Check if you pressed POWER on the remote control unit.

Page 13

• Is the AC cord disconnected?

Page 6

• Has the power been turned on?

Page 13

• Unit cannot be

operated.

• External inﬂ uences such as lightning, static electricity, may cause improper operation.

In this case, operate the unit after ﬁ rst turning off the power of the TV or unplugging
the AC cord and replugging it in after 1 or 2 minutes.

• Remote control unit

does not operate.

• Is the equipment to be operated by the remote control unit set correctly? Press TV to

set the remote control unit to the setting for operating the TV.

• Are batteries inserted with polarity (

e, f) aligned? Page 7

•  Are batteries worn out? (Replace with new batteries.)
•  Are you using it under strong or ﬂ uorescent lighting?
•  Is a ﬂ uorescent light illuminated near the remote control sensor?
•  Is "RC Control Lock" selected in "Operation Lock Out"?

Page 24

• Picture is cut off/with

sidebar screen.

• Is the image position correct?

Pages 24 and 41

• Are screen mode adjustments such as picture size made correctly?

Pages 17 and 18

• Strange color,

light color, or color
misalignment

• Adjust the picture tone.

Pages 21 and 22

• Is the room too bright? The picture may look dark in a room that is too bright.

• Power is suddenly

turned off.

• Is the sleep timer set?

Page 16

• Check the power control settings.

Page 23

• The unit's internal temperature has increased. Remove any objects blocking vent or clean.

• No picture

• Is connection to other components correct?

Pages 10 to 12 and 38

• Is the correct input selected?

Pages 10 and 15

• Is "On" selected in "Audio Only"?

Page 23

• If the PC image is not displayed, check the following:

- When connecting a laptop PC to the TV, check that display output mode of the PC

is set to external monitor.

- Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 42

• Picture quality of HD

programs is poor.

• To enjoy HD images from external equipment, you are required to set up HDMI

connection or component connection.

• If the program content is not of HD quality, HD images cannot be displayed. Check

that the program you are viewing provides HD images.

• The HD cable/satellite set-top box may need to be conﬁ gured to output HD images

via cable/satellite.

• The cable/satellite broadcast may not support a signal resolution of 1080p.

• The TV sometimes

makes a cracking
sound.

• This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature. This does not affect the TV's
performance.

• Some Internet

functions used on a PC
are not available from
the TV.

• The TV has only limited functions compared with regular PC browsers.

Page 45

Problem

Possible Solution

• No sound

• Is connection to other components correct?

Pages 10 to 12 and 38

• Is the volume too low?

Page 15

• Is "Variable" selected in "Output Select"?

Page 24

• Have you pressed MUTE on the remote control unit?

Page 15

• Check the audio output of the connected external equipment. Is the volume too low or

muted?

• When external equipment is connected via an HDMI cable, you may need to conﬁ gure

the audio to be output through the HDMI cable.

• When audio is not output from external equipment connected to the PC IN or HDMI IN

2 terminal, check the "Audio Select" setting.

Page 41

• Even when external equipment is connected using an HDMI-certiﬁ ed cable, an audio

cable connection may be required depending on the type of equipment and the media
being played back. In this case, in addition to connecting an HDMI-certiﬁ ed cable to
the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog".

Page 41

• When connecting a PC via an HDMI-certiﬁ ed cable, check the following:

- Is the audio output of the PC conﬁ gured correctly? Check the audio output settings

and output audio format in Sound Properties on the PC.
The audio formats compatible with this TV are PCM, Dolby Digital and DTS. With
other formats, audio cannot be output.

- Depending on the board, only video signals may be output. In this case, in addition

to connecting an HDMI-certiﬁ ed cable to the HDMI IN 2 terminal, connect a Ø
3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog".

Page 41

• If you are using a DVI-HDMI conversion cable to connect external equipment to the

TV, check the following:
- Is an audio cable connected? The DVI-HDMI conversion cable is for video only.

Connect a Ø 3.5 mm stereo minijack cable to listen to the audio.

- Is HDMI IN 2 being used? When the TV is connected to another HDMI IN terminal,

the audio and video are not output together even if a Ø 3.5 mm stereo minijack
cable is connected to the shared AUDIO IN terminal for PC IN and HDMI IN 2.

- Check the "Audio Select" setting. Set "Audio Select" to "HDMI+Analog".

Page 41

Troubleshooting - 3D Images

Problem

Possible Solution

• 3D images are not

displayed.

• Is "3D Auto Change" set to "Off"? Press 3D to switch to 3D mode.

Page 30

• If "3D Auto Change" is set to "Mode 1" or "Mode 2" but no 3D images are displayed,

check the display format of the content being viewed. Some 3D image signals may
not be recognized as 3D images automatically. Press 3D to select the appropriate
display format for the 3D image.

Pages 30 to 31

• Is the power of the 3D Glasses turned on?
• Are the 3D Glasses set to 2D mode?

For further details, refer to the operation manual of your 3D Glasses.

Appendix

LC-70UD1U_E.indd 49

2013/07/17 15:42:21