Epson EX50 Manuel D’Utilisation

Before using the projector, read these instructions and the safety instructions in the 
User’s Guide on your projector CD-ROM.

Remove the battery cover.

Insert the batteries.

Replace the battery cover.

 Follow these instructions to connect the projector to your computer using

the USB cable (Windows

®

only), or to your video equipment using an HDMI

cable (EX70 only) or component video cable. For instructions on using

other connection options, see the User’s Guide on your CD-ROM.

If you’re connecting a Windows Vista

®

, XP, or 2000 computer to the

projector, you can use the USB cable. You don’t need to use the VGA

cable.

Make sure the projector is turned on.

Turn on your computer.

Connect the square end of the USB cable to the projector’s

TypeB

USB port.

Connect the flat end of the cable to any available USB port on your

computer.

Follow the instructions on your computer screen to install the Epson

USB Display software (you need to install the software only the first

time you connect). After the software has been installed, you see

your computer’s screen displayed by the projector.

  If you see a “Digital Signature Warning” while installing the

software, select Continue.

 You can connect an optional audio cable if you want to play sound through

the projector. See the User’s Guide on your CD-ROM for instructions.

Open the

A/V Mute slide (lens cover).

Connect the power cord to the projector and plug

the other end into an electrical outlet.

 

The   power light on the projector turns orange.

Turn on your computer or video source.

Press the

power button on the projector or remote control. The

projector beeps, the

power light flashes green, and the projector

warms up. When the

power light stays green, the projector is

ready for use.

If you’re using a computer, shut it down first, while you can still

see the display.

Press the

power button on the projector or remote control.

When you see the confirmation message, press the

power

button again. The projector beeps twice and the

power light

turns orange.

  With Epson’s Instant Off

®

technology, there’s no cool-down period. When

you’re done, just unplug the projector and it’s ready to travel.

Turn over

 You should have the following items:

  Canada only: For French speakers, remove sticker(s) from the interface

label backing sheet and place over corresponding text on the control
panel.

 The projector supports 4 viewing setups: front projection, ceiling projection,

rear projection, and rear/ceiling projection. Choose the best one for your

environment. If you install the projector in a rear or overhead position,

you’ll need to choose the correct projection option from the

Extended

menu. See the User’s Guide on your CD-ROM for instructions.

 The distance between the projector and the screen generally determines the

size of the image, but the size can also vary depending on the aspect ratio

(image shape), how you zoom into the image, and whether you’ve adjusted

other image settings. Depending on the projector model you are using and

the image settings you’ve chosen, you can place the projector anywhere

from 33 to 412 inches (84 to 1047 cm) from the screen.

 Use the tables in the User’s Guide or the Image Size calculator on the

Multimedia Projectors page on Epson’s website to help you determine the

proper projection distance.

Projector

Power cord

VGA cable

User’s Guide

CD-ROM

Carrying case

Password

Protected sticker

Projector

remote control

(EX30/EX50)

Batteries

*411506800*

*411506800*

Component-to-VGA

adapter

(EX30/EX50 only)

Projector

remote control

(EX70)

USB cable

Power button

EX30/EX50

Power button

EX70

EX30/EX50

EX70

Power button

Power light

Interface label stickers

(Included for Canada only)