Epson equity y14499113001 Manuel D’Utilisation

Use the Primary serial port and Secondary serial port options to change

the default parameters for the serial ports installed in your computer. The
primary serial port is the one that you refer to in MS-DOS as COM1: -

normally the built-in serial port. You might use this port for a serial printer,

or an external modem. The secondary serial port is the one you address as
COM2: - normally a serial port on an option card. This might be the name

used for an internal direct modem.

For example, if you have a serial printer attached to the built-in serial

port, you can use the Primary serial port option to match the computer’s
parameters to the printer’s switch settings so that you do not need to use a

MODE command to set up the serial port when it is needed.

The process for changing the default serial port settings is identical for

the primary and secondary serial ports. This section uses the primary serial
port as an example.

To alter the primary serial port parameters, move the cursor to Primary

serial port and press 

You see a menu of serial parameters similar to

this:

Baud rate

 bps

Parity

None

Data length

8 bits

Stop bits

1 bit(s)

 SAVE SETTINGS 

To set the speed of communication, move the cursor to Baud rate and

press 

The screen displays:

 bps
 bps

 

 

 

 bps
 

2-5