Epson fx-870-1170 Manuel D’Utilisation

Printer Features

Type of letters

Print speed [cps]

High-speed draft

380

Draft pica

285

Draft elite

342

Condensed draft pica

243

Emphasized draft pica

142

NLQ normal pica

57

Notes:

 The printing speed for high-speed 

 is reduced to the value in     with

thick paper (over 0.007 inches or 0.18 mm).

2. The printing speed for high-speed draft is reduced to the value of “draft

pica” when any graphic character is in the line.

3. The printing speed for draft is reduced to the value in     when any italic

character is in the line.

4. The speed for high-duty printing is reduced to approximately half of each

speed, except for the printing speed in   

24K or OK bytes (selectable with power on default settings; see 

later in this chapter.)

This printer has a built-in, 8-bit Centronics parallel interface.

Data transmission mode

 parallel

Synchronization

Controlled by external STROBE pulse.

Handshaking

Controlled by ACKNLG and BUSY signals.

Logic level

TTL-compatible

Connector plug

57-30360 (Amphenol) or equivalent

It is recommended that the interface cable be as short as possible   10 feet or 3 meters,
maximum).

Epson 

1-13