Epson fx-870-1170 Manuel D’Utilisation

Printer Features

should be shielded and connected to the chassis of the host computer and
the printer, respectively.

4. All interface conditions are based on 

 level. Both the rise and fall times

of each signal must be less than 0.2 us.

5. Data transfers must not be carried out by ignoring the ACKNLG or BUSY

signal. (Data transfers to this printer can be carried out only after con-
firming the ACKNLG signal or when the level of the BUSY signal is LOW.)

The following interface cards can be used for this printer:

Serial 

 card (Type B)

32KB intelligent serial 

 card (Type B)

32KB intelligent parallel 

 card (Type B)

Coax interface (Type B)

 interface (Type B)

Epson