Sansui hdlcd185w Manuel D’Utilisation

1. Open the battery compartment cover.

2. Install two “AAA” batteries (supplied).

3. Replace the battery compartment cover.

Before using the remote control, batteries must first be installed.

Use two “AAA” size batteries. The batteries may last 

approximately one year depending on how much the 

remote control is used. For best performance, it is 

recommended that batteries should be replaced on a 

yearly basis, or when the remote operation becomes 

erratic. Do not mix old and new batteries or different 

types. 

These precautions should be followed when using 

batteries in this device:

Use only the size and type of batteries specified.

Be sure to follow the correct polarity when 

installing the batteries as indicated in the battery 

compartment. Reversed batteries may cause 

damage to the device.

Do not mix different types of batteries together (e.g. 

Alkaline and Carbon-zinc) or old batteries with fresh 

ones.

If the device is not to be used for a long period of 

time, remove the batteries to prevent damage or 

injury from possible battery leakage.

Do not try to recharge batteries not intended to be 

recharged; they can overheat and rupture. (Follow 

battery manufacturer’s directions.)

•

•

•

•

•

1.POWER Button - Used to turn the power on/off to 

the LCD TV.

2.Direct Channel Selection Buttons (0-9) - Allows 

direct access to any channel of the LCD TV.

3.– Button -This button is the “–” button used when 

selecting digital channels.

4.CH (CHANNEL) + / – / CURSOR   /   Buttons - 

Used to operate the menu functions of the LCD TV, 

and to change the channels of the LCD TV.

5.EXIT Button - Press to remove setup menu.

6.MENU Button - Use to display the On-Screen 

menu function.

7.SLEEP Button - To set the LCD TV to turn off 

after a preset amount of time, use the SLEEP 

button on the remote control.

8.CCD Button - Used to display the Closed Caption 

menu screen.

9.AUDIO Button - Change soundtrack language.

10.RECALL Button - This button allows you to go 

back to the previous channel selected by just 

pressing the RECALL button. Press this button 

again to return to the channel you were watching.

- Used to operate the menu functions of the LCD 

TV. Press the   button to increase, or the   button 

to decrease the sound level.

12.ENTER Button - Use to enter or select 

information for On-Screen operations.

13.DISPLAY Button - When you press this button, 

the current information will be displayed on a 

screen. To remove the display from the screen, 

press this button again.

14.MUTE Button - To turn off the sound, press this 

button once. The LCD TV will be silenced and 

the symbol “Mute” will appear on the screen. The 

muting feature can be released by pressing the 

MUTE button again or one of the VOL (VOLUME) 

+ or – buttons.

15.INPUT SELECT Button - Use to change the 

external input.

16.SCREEN SIZE Button - Used to change the 

picture size.

3EZ0601A_En.indd   10

3EZ0601A_En.indd   10

6/6/11   8:51:08 PM

6/6/11   8:51:08 PM