Epson DFX-5000+ Manuel D’Utilisation

The printer advances paper to the tear-off position only when

the printer receives a full page of data or a form feed command

and no more data is received for three seconds.

1. Make sure the printer is turned off.

2. Turn DIP switch 3-8 on.

3. Turn the printer on.

When tear-off mode is on and you print on continuous paper

on the push tractor, the printer advances the final printed page

to the tear-off position. Then you can tear off all printed pages.

If the perforation is not aligned with the tear-off edge, adjust

the tear-off position as described in the section on adjusting the

tear-off position.

When you resume printing, the printer automatically feeds the

paper back to the loading position and begins printing.