Epson 400 Series Manuel D’Utilisation
Problem Solving
57
No picture appears on the screen or you see the
No Signal
message
displayed.
■
Press the
Source
button on the projector or one of the
Source
buttons on the remote
control to select the correct input source. Allow a few seconds for the projector to sync up
after pressing the button.
after pressing the button.
■
Press the
Blank
button on the remote control to make sure the picture hasn’t been turned
off temporarily.
■
Check that the P power light is green, not flashing, and the lens cover is off.
■
The projector may be in standby (or sleep) mode. If the P power light is orange, press the
Power
button to turn the projector back on.
■
Make sure your video equipment is turned on.
■
Make sure your cable(s) are connected correctly (see page 18).
You’re using a computer and no picture appears on the screen.
If you’re using a PC laptop:
■
Press the function key that lets you display on an external monitor. It’s often labeled with
an icon such as
an icon such as
, but it may also be labeled
CRT/LCD
. You may have to hold down
the
Fn
key while pressing it. Check your laptop’s manual or online help.
On most systems, the
key lets you toggle between the LCD screen and the
projector, or display on both at the same time. Allow a few seconds for the projector to
sync up after pressing it.
sync up after pressing it.
■
If the function key doesn’t let you display simultaneously on both screens, you might
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
Display
utility. In the Display Properties dialog box, click the
Settings
tab,
then click
Advanced
. The method for adjusting the setting varies from computer to
computer; you may need to click a
Monitor
tab, then make sure the external Monitor
port is set as your primary display or enabled. See your computer manual or online help
for details.
for details.
If you’re using a Macintosh with OS X:
1. Select
System Preferences
from the Apple menu and click
Displays
.
2. Click
Detect Displays
.
3. To display the entire desktop on both your projector screen and LCD screen, click the
Arrange
tab. (If you don’t see this tab, make sure it isn’t hidden by another window.)
PowerLite Cinema 400.book Page 57 Friday, July 7, 2006 2:24 PM