Epson 10020 Manuel D’Utilisation

You can select the individual checks from this menu:

MONOCHROME ADAPTER AND CRT CHECK MENU

1 - Monochrome adapter check

- Attribute check

- Character set check

- Video check

Sync check

- Run all above checks

- Exit

Enter selection number:

If you run the monochrome adapter check multiple times,

this menu of checks 

does 

not appear and only the first test

(option 1) is performed.

If an error occurs during any of these tests, record the 

error code

and message, or print them out. Then contact your Customer
Care Center.

When you finish running the monochrome adapter check, press

0 and Enter 

to return to the DEVICE LIST.

To check the monochrome adapter, press 

and then 

Enter.

The computer checks the video RAM (display memory) on the
display adapter by writing certain data to memory, then reading

it back and comparing it to the written data. It also tests the
video enable signal of the display controller chip.

Performing System Diagnostics