Troy-Bilt c3x-d3x Manuel D’Utilisation

Uneven cut

1.  Wheels not positioned correctly. 

2.  Dull blade.

1.  Place front and rear wheels in same height 

position. (Dual Height Adjusters)

2.  Sharpen or replace blade.

Mower will not self propel

1.  Belt not installed properly. 

2.  Debris clogging drive operation. 

3.  Damaged or worn belt.

4.  Drive control out of adjustment.

1.  Check belt for proper pulley installation and 

movement.

2.  Stop engine, disconnect spark plug boot,  

and clean out debris.

3.  Inspect and replace belt.

4.  Adjust drive control. (See Assembly & Set-up 

section).

High pullback effort

1.  Pulling mower backwards before 

transmission disengages.

1.  Allow the unit to roll forward slightly without 

the drive lever(s) engaged before pulling 

backwards.