Manualsbrain.com
  1. Manuels
  2. Marques
  3. Tascam
  4. CD-500
  5. Manuel D’Utilisation

Tascam CD-500 Manuel D’Utilisation

Télécharger
Page de 40
30
  
TASCAM CD-500/500B
3  While the beginnings of the tracks are being 
loaded into memory, the word 
FLASH
 blinks on 
the display. After loading completes, 
FLASH 
01-10
 appears on the display and the Á PLAY 
indicator blinks. 
4  Press the number button for the program number 
(when program set) or track number (when 
program not set) that you want to play. 
  To select numbers between 11 and 20, press the 
CLEAR [1-10/11-20] button, so that 
FLASH 11-
20
 appears on the display, and then press the 
corresponding number button. Press the CLEAR [1-
10/11-20] button again to return to 
FLASH 1-10
. 
Using the remote control: 
1  Prepare the program as necessary. 
2  Press the FLASH button. 
3  While the beginnings of the tracks are being 
loaded into memory, the word 
FLASH
 blinks on 
the display. After loading completes, 
FLASH 
01-10
 appears on the display and the Á PLAY 
indicator blinks. 
4  Press the number button for the program number 
(when program set) or track number (when 
program not set) that you want to play. 
  To select numbers between 11 and 20, press the 
CLEAR [1-10/11-20] button, so that 
FLASH 11-
20
 appears on the display, and then press the 
corresponding number button. Press the CLEAR [1-
10/11-20] button again to return to 
FLASH 1-10
. 
Exiting flash start mode 
 
ª
Using the front panel buttons: 
  When in shift mode (SHIFT indicator lit), press the 1 
[FLASH] number button to exit flash start mode. 
Using the remote control: 
  Press the FLASH button to exit flash start mode. 
Relay playback 
Multiple CD-500 and CD-500B units can be used together 
and set so that when playback ends on one unit, playback 
can automatically start on another unit. 
To do this, connect the CONTROL I/O START (RELAY IN) 
connector on the rear panel of the CD-500/CD-500B to 
the CONTROL I/O DISC EOM (RELAY OUT) on another 
CD-500/CD-500B with a cable and enable relay playback 
mode on both units. 
To enable relay playback mode, set the 
06 RELAY
 
menu item to 
ON
. 
By connecting two CD-500/CD-500B units in both 
directions as shown in illustration below, alternating 
playback between them is possible.
RELAY IN
RELAY OUT
RELAY IN
RELAY OUT
By connecting three or more CD-500/CD-500B units in 
sequence (CONTROL I/O START (RELAY IN) to CONTROL 
I/O DISC EOM (RELAY OUT)) as shown below, automatic 
playback of one unit after the other is possible. 
NOTE
The relay playback function on/off setting is retained even 
when the power is turned off. 
RELAY IN
RELAY OUT
RELAY IN
RELAY OUT
6 – Various Playback Functions