Epson apex 20020, 20040 Manuel D’Utilisation

4. Next the screen displays the time prompt, like this:

Current time is 

09 : 32 : 21

Enter new time:

You may enter the correct time in the format shown (such

as 

04 

: 30 : 00), or you may accept the time shown by

pressing 

Enter. 

MS-DOS is now loaded and displays the

MS-DOS command prompt:

A>

Once you have loaded MS-DOS, you can start using your

application program. If you have already copied the application

program to the hard disk, log onto drive C (and the appropriate
directory, if necessary). Then just enter the necessary command
to start the application program, as described in the program’s

manual. From this point on, until you return to the MS-DOS
command prompt, refer to the application program manual for
any instructions on using the program.

MS-DOS uses letters to identify the disk drives in your
computer. If you have one diskette drive, it is known as drive
A. If you have two diskette drives, the top one is called drive A
and the bottom drive is B.

MS-DOS identifies the hard disk as drive C, even if you have

only one diskette drive.

Using MS-DOS With Your Computer

4-3