Sansui hdlcd1900 Manuel D’Utilisation
16
Connections to other equipment
VGA cable (not supplied)
To connect the LCD TV to a PC (Personal Computer)
Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate
(60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the
VGA connector PC MONITOR on the back of the LCD TV. Attach the connectors firmly with the screws on the
plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia
computer and to the AUDIO connector of the PC AUDIO IN jack of the LCD TV.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The LCD TV can operate as the computer monitor.
(60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the
VGA connector PC MONITOR on the back of the LCD TV. Attach the connectors firmly with the screws on the
plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia
computer and to the AUDIO connector of the PC AUDIO IN jack of the LCD TV.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The LCD TV can operate as the computer monitor.
Monitor Display modes
MODE
Resolution
Refresh rate
VGA
640x480
60Hz
VGA
720x400
70Hz
WVGA
848x480
60Hz
SVGA
800x600
60Hz
XGA
1024x768
60Hz
WXGA
1280x768
60Hz
WXGA
1280x720
60Hz
To return to normal mode
Press INPUT SELECT again.
Press INPUT SELECT again.
Rear of the LCD TV
PC
AUDIO
IN jack
To PC IN
NOTE:
•
The on-screen displays will have a different appearance in PC mode than in TV mode.
•
If there is no video signal from the PC when the unit is in PC mode, “NO SIGNAL” will appear on the TV-
screen.
screen.
Audio cord (not supplied)
33F0201A_En_p12-17
7/5/07, 3:29 PM
16