Manualsbrain.com
  1. Manuels
  2. Marques
  3. Sansui
  4. hdlcd1900
  5. Manuel D’Utilisation

Sansui hdlcd1900 Manuel D’Utilisation

Télécharger
Page de 44
39
Example: Adjust the H-Pos in the component mode.
1
Press INPUT SELECT repeatedly to select the component
mode.
2
Press MENU during the
component mode. Then press
▲ or ▼ to select “Feature”
menu, then press  .
3
Press 
▲ or ▼ to select
“Component Set”, then press 
or ENTER.
4
Press 
▲ or ▼ to select
“H-Pos”, then press   or
ENTER.
5
Press   or   to adjust the
setting.
You can adjust to optimize the
performance of the TV in the
Component and PC mode.
C o m p o n e n t   s e t t i n g   -   7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z
H-Pos
48
V-Pos
48
Clock
50
Phase
51
Auto adjust
Setting
To Move
To Select
To Exit
Enter
Menu
Preset
H-Pos:
To adjust the horizontal position of the
image on the PC Monitor-screen.
V-Pos:
To adjust the vertical position of the
image on  the PC Monitor-screen.
Clock:
To minimize any vertical bars or stripes
visible on the screen background.
Phase:
This must be adjusted after the frequency
of your PC has been set to 60hz to
optimize pic ture quality  (page 16).
Auto adjust
(PC Setting only):
To optimize “H-Pos”, “V-Pos”, “Clock”
and “Phase” automatically.
Setting:
To return your settings to the factory
settings.
6
Press MENU to return to the normal screen.
NOTE:
• If no buttons are pressed for more
than approx. 30 seconds, the Menu-
screen will return to normal Monitor-
screen automatically.
• The “Component Set” and “PC Set”
settings are not effective for normal
mode, or other input modes.
H-Pos
56
Picture control adjustment in the Component and PC mode
 
  
 
 
 
 
 
  
 
 
 
 
 33F0201A_En_p36-39
7/5/07, 3:29 PM
39