Swann PRO-660 Manuel D’Utilisation
3
The RS485 Controller
Using the Quick Configuration
The Quick Config button will give you instant access to the following settings:
1. DYNAMIC: Digital Wide Dynamic Range (DWDR) [page 10]
2. CONTRAST [page 14]
3. SHARPNESS [page 14]
4. BRIGHTNESS [page 9]
5. AUTO BW AT NIGHT: When disabled, the camera will attempt
2. CONTRAST [page 14]
3. SHARPNESS [page 14]
4. BRIGHTNESS [page 9]
5. AUTO BW AT NIGHT: When disabled, the camera will attempt
to create color images at night. This can result in increased color
information at the cost of image quality.
information at the cost of image quality.
• These settings are exactly the same as the ones in the Main Menu.
• Cycle through these settings by pressing the Quick Config button repeatedly.
• The Quick Adjust buttons will change the setting you’ve currently selected.
• To confirm a change and exit the Quick Configuration screen, click Save
• Cycle through these settings by pressing the Quick Config button repeatedly.
• The Quick Adjust buttons will change the setting you’ve currently selected.
• To confirm a change and exit the Quick Configuration screen, click Save
Quick Config.
Connecting the OSD Controller
The two connections (RS485 and DC
12V) are located on the bottom of
the controller.
Use the supplied RS485 jack and
power splitter to connect the
controller. A complete connection
diagram is located on pages 4 - 5.
12V) are located on the bottom of
the controller.
Use the supplied RS485 jack and
power splitter to connect the
controller. A complete connection
diagram is located on pages 4 - 5.
Quick Adjust +
Main Menu
Save Quick Config
Quick Config
Quick Adjust -
Arrow Buttons
The arrows are
used to navigate
through the main
menu.
DC 12V In
RS485 Port