HP Compaq KB-9965 311059-171 Manuel D’Utilisation

 

 

  Always populate power supply bays with either a power supply or blank. Proper 

airflow can only be maintained when the bays are populated. Unpopulated power supply bays 

can lead to improper cooling and thermal damage. 

To remove a power supply blank: 

1.  Remove the two Torx T-15 screws securing the hot-plug power supply blank to the 

chassis (1). 

2.  Pull the power supply blank up and away from the chassis (2). 

 

Reverse steps 1 and 2 to replace a power supply blank. 

To remove a drive blank: 

1.  Open the front bezel door (tower model only). Refer to “Removing the Front Bezel Door 

(Tower Model Only)” in this chapter.