Sub-Zero 200 install guide Manuel D’Utilisation
10
10
10
10
10
D O O R S W I N G C H A N G E
Model 245: Upper; interchange hinge, screws and corner
cap with hole plugs and corner cap on opposite side of cab-
inet and door. Lower; interchange hinge and screws with
hole plugs on opposite side of cabinet. Move closer cam,
screw and cam support plate to opposite side of door.
(See Illustrations 6 & 7.)
cap with hole plugs and corner cap on opposite side of cab-
inet and door. Lower; interchange hinge and screws with
hole plugs on opposite side of cabinet. Move closer cam,
screw and cam support plate to opposite side of door.
(See Illustrations 6 & 7.)
A D J U S T I N G T H E H I N G E S
It is possible that doors may come out of adjustment If
doors need adjustment, please refer to the follwoing door
adjustment directions.
doors need adjustment, please refer to the follwoing door
adjustment directions.
Model 249 Series: Top and bottom hinges can be adjust-
ed left to right and in & out, by loosening the two Phillips
head screws. Model 245: Hinges are factory set; no field
adjustment provided for. (See Illustration 5). Model 249
Series: Can be ordered either as a right-hand or left-hand
product. Contact Sub-Zero dealer if swing change kit is
required.
ed left to right and in & out, by loosening the two Phillips
head screws. Model 245: Hinges are factory set; no field
adjustment provided for. (See Illustration 5). Model 249
Series: Can be ordered either as a right-hand or left-hand
product. Contact Sub-Zero dealer if swing change kit is
required.
2 0 0
S E R I E S
Illus. 5
Illus. 7
Illus. 6
200 IG 3758400 1-04.qxd 1/2/2004 7:55 AM Page 10