Epson P-1000 Manuel D’Utilisation

❍

Use only the power source that meets the power 
requirements indicated on the label attached to the 
product. If you are not sure of the power supply 
specifications in your area, contact your local power 
company or regulatory agency. 

❍

Make sure the total amperage of all devices plugged into 
the power outlet does not exceed the power outlet’s 
ampere rating.

❍

Do not use a damaged or frayed AC adapter.

❍

If you use an extension cord with this product, make 
sure the total amperage of all devices plugged into the 
extension cord does not exceed the cord’s amperage 
rating.

❍

Never disassemble, modify, or attempt to repair the AC 
adapter by yourself.

❍

Do not use power outlets controlled by wall switches or 
automatic timers.

❍

Do not use power outlets on the same circuit as large 
motors or other appliances that may cause voltage 
fluctuations.

❍

Avoid using outlets on the same circuit as photocopiers 
or air control systems that regularly switch on and off.

❍

Position this product’s power cord so that it will not be 
stepped on or run over.

❍

Do not place any objects on the power cord and the AC 
adapter.

❍

Keep the power cord straight at the ends and at the 
points where it enters the transformer.

❍

The power cord should be placed to avoid abrasions, 
cuts, fraying, crimping, kinking, and other damage.

❍

If you cannot insert the plug into the power outlet, 
contact an electrician.

❍

For US and Canadian users: Use the included power 
cord or a 6 to 10 foot UL-approved type SPT-2 or 
heavier type, 2 

x

 18 AWG cord with a 125 V 10 A plug 

and 125 V 7 A connector.

❍

Only memory cards designed for the product’s 
specifications can be used. (See page 7.)

❍

The methods for using memory cards vary according to 
card type. See the documentation included with your 
memory card for details.

❍

Do not remove a memory card or turn off the product 
while the 

ACCESS

 light is flashing.