Garmin g1000 beechcrafta36 g36 audiopanel pilots guide Manuel D’Utilisation
Garmin G1000 Pilot’s Guide for the Beechcraft A36/G36
190-00573-00 Rev. A
6-11
OPERATION
DIGITAL CLEARANCE RECORDER WITH
PLAYBACK CAPABILITY
The audio panel contains a digital clearance recorder
that plays back up to 2.5 minutes of COM signal recording.
Recorded COM audio is stored in separate memory blocks.
Audio from all of the selected COM radios are recorded
and can be played back. Anyone able to hear the selected
COM radios is able to hear the COM audio playback.
Recorded COM audio is stored in separate memory blocks.
Audio from all of the selected COM radios are recorded
and can be played back. Anyone able to hear the selected
COM radios is able to hear the COM audio playback.
Once the 2.5 minutes of recording time have been
reached, the recorder begins recording over the stored
memory blocks, starting from the oldest block. Powering
off the unit automatically clears all recorded blocks.
memory blocks, starting from the oldest block. Powering
off the unit automatically clears all recorded blocks.
Figure 6.2.7 Playback Key
The PLAY key controls the playback function.
• Pressing PLAY once plays back the latest recorded
memory block, then returns to normal operation.
• Pressing PLAY during playback of a memory block
halts the playback of this block and plays back the
preceding recorded block. The PLAY key can be
used to backtrack through the recorded memory
blocks to reach and play back any desired block.
preceding recorded block. The PLAY key can be
used to backtrack through the recorded memory
blocks to reach and play back any desired block.
NOTE: Pressing the MKR/MUTE key during
playback halts playback and returns the recorder/
playback to normal operation.
playback to normal operation.
During playback, the PLAY annunciator light blinks
approximately once per second. If a COM input signal is
detected during playback, playback is halted and the new
COM audio is recorded as the latest block.
detected during playback, playback is halted and the new
COM audio is recorded as the latest block.
NOTE: The recorder can be permanently disabled
by a Garmin-authorized service center.
NOTE: If the COM muting on receive option
is enabled, only the primary COM radio audio
reception is recorded by the digital clearance
recorder.
reception is recorded by the digital clearance
recorder.
REVERSIONARY MODE
The red DISPLAY BACKUP button selects the
reversionary mode for all displays. Reversionary mode
operation displays important flight and engine information
on both the PFD and MFD, in case of display failure.
operation displays important flight and engine information
on both the PFD and MFD, in case of display failure.
Figure 6.2.8 Reversionary Mode Button