Philips boston rally rx57din Manuel D’Utilisation
Use programmed recording to automatically start and stop a
recording at a later date.
recording at a later date.
The TV-Video Combi requires the following information for
each programmed recording:
each programmed recording:
* the date you want to make the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
The TV-Video Combi stores all above mentioned information in
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
Programming a recording
a
Press the
TIMER k
button on the remote control. The free
TIMER block will be highlighted.
b
Press the
TIMER k
button. The current information will
appear on the screen.
TIMER PROGRAMMING
DATE
PROG.
START
END
01
01
20:15
21:30
STORE: OK
c
Use the buttons
SqP
or
QSr
to select
different entry fields: ’DATE’ (Date), ’PROG.’ (Programme
number), ’START’ (Start time), ’END’ (End time).
Enter or change your information with
number), ’START’ (Start time), ’END’ (End time).
Enter or change your information with
;P q
or
=P r
, or with the number buttons
0..9
.
d
If all information is correct, press the
OK
button.
D The information has been stored in a TIMER block.
e
Insert a cassette that is not erase protected.
f
Switch off using the
STANDBY m
button.
The programmed recording will only function properly, if
the TV-Video Combi has been switched off using the
button
the TV-Video Combi has been switched off using the
button
STANDBY m
.
D If the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button
being used for playback, ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button
OK
, to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
TV-Video Combi switches off during this operation.
D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
would like to stop a programmed recording session,
press the button
would like to stop a programmed recording session,
press the button
STANDBY m
for more than 3
seconds.
D During recording, the red recording light at the front
of the machine (
RECORD 5
) will be alight.
D If the end of the cassette is reached during a
recording, the TV-Video Combi will automatically
eject the cassette.
eject the cassette.
D If you forgot to insert a cassette, ’NO CASSETTE’
will appear.
D If you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected automatically.
be ejected automatically.
D If ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press the
TIMER k
button, you
have used up all the available TIMER blocks. If you
want to clear or check a programmed recording
(TIMER block), select it with
want to clear or check a programmed recording
(TIMER block), select it with
;P q
or
=P r
.
D If the message ’DATA ERROR’ appears on the
screen momentarily, the data for the recording was
not transferred. Please check date, start time and
end time of the programmed recording
not transferred. Please check date, start time and
end time of the programmed recording
D Programme number ’E1’ is provided for recording
from external sources (via the
EXT
scart socket).
7.
PROGRAMMED RECORDING (TIMER)
18