Philips cpwna001 Manuel D’Utilisation
Problem Possible
cause
Solution
NETWORK CONNECTION PROBLEMS
If the Link LED on
Wrong operating
Make sure the correct software driver is installed
the PC Card does
system.
for your operating system. If necessary, try
not light, or if you
reinstalling the driver.
cannot access any
network resources
network resources
PC or other network
Make sure the computer and other network
from the computer.
devices switched off.
devices are receiving power.
No access to a
Service unavailable.
Check that you have enabled and configured the
Windows or Net-
service correctly.
Ware service on the
If you cannot connect to a particular server, be
network.
sure that you have access rights and a valid ID and
password.
If you cannot access the Internet, be sure you have
configured your system for TCP/IP.
password.
If you cannot access the Internet, be sure you have
configured your system for TCP/IP.
If your wireless
Base Station / Access
Make sure the access point that the station is
adapter cannot
Point is switched off.
associated with is powered on.
communicate with a
computer in the
computer in the
Range too long
Reposition your Wireless Adapter.
network when
(weak radio signal).
configured for
Infrastructure mode.
Infrastructure mode.
Wrong settings
Make sure the SSID and the network encryption
key are the same as those used by the wireless
access point.
key are the same as those used by the wireless
access point.
ENGLISH
28