Philips ct3621-ar3sahin Manuel D’Utilisation

Your mobile phone has a built-in alarm clock
with a snooze feature. You can set up to three
separate alarms and choose whether or not

the alarm should repeat. To set an alarm, follow the
steps below:
1.

Select an alarm and set it 

.

Then enter the time and press 

.

Then select the frequency: 

, 

, 

.

Finally, select the type of alarm: the 

 or a

melody from the sounds album and press 

.

Repeat above steps to set other alarms.

This menu allows you to set the snooze mode 

 or

. When the alarm rings and the snooze mode is 

:

• press any key (except 

R 

) to stop the ringing

temporarily. The alarm will ring again around 7
minutes later.

• press 

R 

 to stop the ringing and the alarm

repetition.

The snooze mode is automatically deactivated after 9
alarm repetitions.

Your mobile phone has an infrared port that
allows you to send or receive data to or from
other infrared-compliant devices (e.g.

another mobile phone, a computer, a PDA, etc.)
through a wireless link.

Before transmitting data between two devices, they
must  be  correctly  positioned  in  relation  to  one
another. Make sure that:
• the infrared ports are facing each other,
• they are at a less than 50 cm away from each other.
• nothing obstructs the infrared beam.