Philips esp2 Manuel D’Utilisation

58

Important
• The power saving mode is automatically set to OFF when the LCD monitor is closed.
• When the camera is used in an environment where the temperature is approximately 40

°

C or

higher, the LCD monitor may have a certain uneven quality. The LCD monitor will return to normal
when the temperature decreases.

Note: Depending on the environment in which the camera is used, the power saving mode can vary

because in the number of recording files can be 1.2 times greater than usual and the playback
time is approximately 2.5 hours.

The Power Off Memory function saves your settings when the power is turned off. If the
power is turned off when the Power Off Memory is set, the Flash mode (see page 36),
White Balance mode (see page 40), Auto Power Off (see page 56) and Automatic Play-
back (see page 51) settings are saved. They will be available when the power is turned
on next. All other camera settings will return to the original positions.

q

U

U

U

U

U

T

T

T

T

T

The REC(ord)/PLAY can be set to either REC or
PLAY. The power-off memory setting mode is set.

w

U

U

U

U

U

T

T

T

T

T

Within three seconds, the Power Off Memory will
be set to ON.

Repeat steps 1 and 2 above, selecting OFF at
step 2.