Philips esp2 Manuel D’Utilisation
69
3
4
5
Additional Information
Cause
The distance to the subject ex-
ceeds approximately 3.0 meters.
ceeds approximately 3.0 meters.
The flash discharged when dis-
tance to the subject was less than
60 cm.
tance to the subject was less than
60 cm.
The image is overexposed.
The brightness adjustment dial is
not set correctly.
not set correctly.
The picture was taken in the Flash
Off mode under dark conditions.
Off mode under dark conditions.
The image is underexposed.
The brightness adjustment dial is
not set correctly.
not set correctly.
The image conditions prevent the
Automatic White Balance system
from functioning property.
Automatic White Balance system
from functioning property.
The REC(ord)/PLAY switch is not
set to PLAY.
set to PLAY.
Video connection cable is not cor-
rectly connected to the video out-
put terminal of the camera and the
input terminal of the TV.
rectly connected to the video out-
put terminal of the camera and the
input terminal of the TV.
A noise source, such as a motor,
is close to the camera.
is close to the camera.
This is a malfunction in the
camera’s internal memory.
camera’s internal memory.
The batteries are dead.
The Auto Power Off system has
activated.
activated.
There is an obstruction in the path
between the reception window of
the camera and the transmission
window of the remote control.
between the reception window of
the camera and the transmission
window of the remote control.
The reception window on the cam-
era or the transmission window on
the remote control is dirty.
era or the transmission window on
the remote control is dirty.
The lithium battery in the remote
control is dead.
control is dead.
This condition occurs when a pic-
ture is taken of a well-lit subject. It
is called a smear.
ture is taken of a well-lit subject. It
is called a smear.
Remedy
Reduce the distance to the sub-
ject.
ject.
Select the Flash Off mode.
Compensate the exposure with
the +/– button.
the +/– button.
Turn the brightness adjustment
dial to the right or to the left to ad-
just the brightness.
dial to the right or to the left to ad-
just the brightness.
Press the FLASH button to
change the setting.
change the setting.
Compensate the exposure with
the +/– button.
the +/– button.
Turn the brightness adjustment
dial to the right or to the left to ad-
just the brightness.
dial to the right or to the left to ad-
just the brightness.
Include a white or light-colored
object in the subject, or use the
flash or Fixed White Balance.
object in the subject, or use the
flash or Fixed White Balance.
Slide the REC(ord)/PLAY switch to
PLAY.
PLAY.
Connect the cable properly.
Place the camera where it is not
close to a noise source.
close to a noise source.
Transfer important images to a
computer, then erase all files.
computer, then erase all files.
Replace the batteries with fresh
batteries.
batteries.
Close the LCD monitor to turn off
the power, then turn on the power
again. Or, press the Release but-
ton more than one second.
the power, then turn on the power
again. Or, press the Release but-
ton more than one second.
Clear the path between the cam-
era and the remote control.
era and the remote control.
Clean both windows.
Replace the battery with a fresh
lithium battery (CR2032).
lithium battery (CR2032).
This is not a malfunction.
Problem
The flash discharged
properly but the image
is dark.
properly but the image
is dark.
T h e p i c t u r e i s t o o
bright.
bright.
The image is underex-
posed.
posed.
The picture does not
show natural colors.
show natural colors.
The camera fails to
play back the data or
display an image on
the monitor.
play back the data or
display an image on
the monitor.
The image does not
play back clearly.
play back clearly.
The image on the moni-
tor has disappeared.
tor has disappeared.
The remote control (op-
tional) is malfunction-
ing.
tional) is malfunction-
ing.
The image has a verti-
cal trail.
cal trail.