Philips FW-C80 Manuel D’Utilisation
22
English
3139 116 19681
CLOCK
TIMER
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about 7
seconds.
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about 7
seconds.
• Press CLOCK/TIMER briefly
(or CLOCK
on the remote control).
™ "PM 10:38 or 22:38" (the
™ "PM 10:38 or 22:38" (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
depending on whether you have
selected 12- or 24-hour mode.
™ "--:::::--" will be displayed if the
clock is not set.
Note:
– When the system goes into low power
– When the system goes into low power
standby mode, the clock setting will not
be displayed.
be displayed.
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "
hour mode, e.g. "
AM 12:00" or
"
00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
2 Press PROG
(on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected,
™ If 12-hour mode is selected,
"
AM 12:00" starts flashing.
™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with␣ à or á on the
system.
4 Set the minute with␣ í or ë on the
system.
STANDBY
ON
MINI HIFI SYSTEM
BAND
C 1 • 2 • 3
CDR
STOP
•CLEAR
SEARCH•TUNING
PLAY PAUSE
PREV
NEXT
DUB
(HSD)
RECORD
A. REV
DIM
CLOCK/
TIMER
TIMER
PROG
BASS
TREBLE
wOOx
TECHNOLOGY
IR SENSOR
SIDE
VOLUME
PLUS
LEVEL
PRESET ▲
▲
BASS/T
RE
BL
E
TAPE
CD
TUNER
AUX
VE
C
TAPE 1•2
CD 1•2•3
CDR/DVD
D
IG
IT
A
L
S
O
U
N
D
C
O
N
TR
O
L
BAND
POWER SAVE
RDS
NEWS/TA
5 Press CLOCK/TIMER again to store the
setting.
™ The clock starts.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
– To set the time with RDS clock, see
"Receiving RDS Radio Station" under
TUNER section.
TUNER section.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode automatically
at a preset time. It can serve as an
alarm to wake you up.
at a preset time. It can serve as an
alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than
2 seconds to select timer mode.
™ “AM 12:00” or “00:00" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
depending on whether you have
selected 12- or 24-hour mode.
™ The
TIMER
starts flashing.
™ The selected source is lit while other
available sources are flashing.
2 Press CD, TUNER or TAPE to select the
desired source.
• Before selecting CD or TAPE, make sure
a CD or tape is loaded in the CD tray or
tape deck 2.
tape deck 2.
3 Press␣ à or á on the system to set
the hour for the timer to start.
4 Press␣ í or ë on the system to set
the minute for the timer to start.
pg 01-26/C80/22-Eng
3/6/00, 2:24 PM
22