Philips FWD132 Manuel D’Utilisation

6

●

Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight). Always
keep disc trays closed to avoid dust buildup on
the lens.

●

No objects filled with liquids, such as vases, shall
be placed on the apparatus.

●

No naked flame sources, such as lighted candles,
should be placed on the apparatus.

●

The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.

●

The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.

●

Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free
space all around the player for adequate
ventilation.

   

●

The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.

●

Use soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.

●

To clean a CD, wipe it in a
straight line from the center
towards the edge using soft
and lint-free cloth. A cleaning
agent may damage the disc.

●

Write only on the printed side
of a CDR(W) and only with a
soft felt-tipped pen.

●

Handle the disc by its edge. Do not touch the
surface.

●

After prolonged use, dir t or dust may accumulate
at the disc lens. To ensure good playback quality,
clean the disc lens with Philips CD Lens Cleaner
or any commercially available cleaner. Follow the
instructions supplied with cleaner.

●

Place the player on a flat, hard, stable surface.

●

   Install this unit near the AC outlet and where the

AC power plug can be reached easily.

●

To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of tape
operation.

●

Use a cotton swab slightly moistened with
cleaning fluid or alcohol.

●

  You also can clean the head  by playing a cleaning

tape once.

●

Use a demagnetising tape available at your dealer.

C

B A

B

C

●

When the system is switched to standby mode, it
is still consuming some power. To disconnect the
system from the power supply completely,
remove the AC power plug from the wall
sockets.

●

   Where the mains plug or an appliance coupler is

used as the disconnect device, the disconnect
device shall remain readily operable.

pg 001-028_FWD132-98_Eng

2007.5.15, 16:37

6