Philips mcd280 Manuel D’Utilisation

Page de 38
34
English
Sound and Volume Controls
Sound control
Adjusting volume and sound
1
Press VOLUME –/+ to decrease or increase
volume on the system.
 “
VOLUME XX” is displayed.
 “
VOLUME MAX” is displayed at maximum
level.
Display shows the volume level 
VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press SOUND repeatedly to select the desired
sound effect: JAZZ/ROCK/POP/OPTIMAL.
3
Press DBB to switch bass enhancement on or
off.
Display shows: DBB ON or DBB OFF.
Note:
The speakers will be muted when headphones are
connected to the set.
Incredible Surround
The Incredible Surround magnifies the virtual
distance between the front speakers for an
incredibly wide, enveloping, stereo effect.
Press SURROUND to switch Incredible
Surround on or off.
If activated, ”
IS ON” is shown and
” is displayed.
If deactivated, “
IS OFF” is displayed.
Microphone Mixing
Connect microphones (not supplied) to the
system to sing along with the music source.
1
Connect microphones to MIC jack.
Before connecting the microphone, set the
microphone level with VOL to the lower level to
prevent howling sound by turning the MIC VOL
knob.
2
Select DISC to start playback.
Press ECHO to select MIC ON.
3
Adjust the volume level of the source with
VOLUME –/+ control.
4
Press ECHO again to select ECHO ON or OFF.
5
Start singing or talking through the microphone.
6
Press KEY to select key tone if necessary.
Notes:
– Keep the microphones away from the speakers
to prevent howling.
– Microphone mixing only available in VCD mode.
Key Control
This feature allows you to change the key tone
of your vocal range.
Press KEY on the remote control.
"
-KEY SHIFT+" appears on the TV screen.
Press 
3  ALBUM 4 to decrease or increase the
vocal key level between -7 and +7.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
Press ECHO on the remote control to select
ECHO ON or ECHO OFF.
Switching off the volume temporarily
Press MUTE.
MUTE ON” is displayed.
Press MUTE again or increase the volume level
to cancel the MUTE mode.
Listening through headphones
Connecting headphones to ; will switch off the
speakers. The system will switch STEREO and
the surround sound will be reduced to a stereo
signal which is reproducible by standard
headphones.
Disconnecting the headphones will switch on the
speakers again. If you wish to enjoy surround
sound again, switch the system back to surround
sound.