crimestopper-security-pro cs-2013fm Manuel D’Utilisation

 

 

Clock Setting: 
1.  Press and hold buttons #2 (Key Symbol) & #3 (Trunk Symbol) together until 2 beeps are heard. 
2.  Immediately release Buttons #2 & 3. 
3.  Observe the time display on the LCD screen. Press the #2 button to set the hour and press the #3 button the set minutes. 
4.  When the correct time is displayed, press button #5 (C) to set the time.  The remote will emit a congratulation song and 

the correct time of day will now appear at the top of the LCD screen. 

 

Alarm Clock Setting: 
1.  Press and hold buttons #2 & #3 together for the following sequence: [2 beeps]-[3 beeps].  If done correctly, the Alarm 

Clock Icon will appear. 

2.  Immediately release Buttons #2 & #3. 
3.  Observe the alarm time display on the top of the LCD screen. Press the #2 button to set the Hour and press the #3 button 

the set minutes for any desired alarm time. 

4.  Press button #5 (C) to set the alarm time.  The remote will emit a congratulation song and an alarm clock icon will display 

next to the time of day on the LCD as an indicator the alarm has been set.  Note: Alarm clock sounds one time for 
each setting.  Follow steps 1, 2, and 3 to reset alarm for a new time or follow steps 1 & 3 only to set alarm for same time 
again. 

 

To cancel an alarm that has already been set: 
1.  Press and hold buttons #2 & #3 together for the following sequence: [2 beeps]-[3 beeps]. 
2.  Immediately release Buttons #2 & #3.  The alarm clock icon should appear on the display. 
3.  Press button #1.  The remote will emit a set of tones and the word “OFF” will appear for 5 seconds on the LCD screen. 

 

Self-Start Timer: 
1.  Press and hold buttons #2 & #3 together for the following sequence: [2 beeps]-[3 beeps]-[4 beeps].  If done correctly, the 

Engine Icon will appear on the LCD screen. 

2.  Immediately Release buttons #2 & #3. 
3.  Observe the time display in the top of the LCD screen and press the #2 button to set the Hour and press the #3 button to 

set the minutes for any desired remote start time. 

4.  Press button #5 (C) to set the remote start time and the remote will emit a congratulation song.  A clock and an engine 

icon will display indicating the remote start timer has set.  Note: The Remote Start Timer activates once for each 
setting. Vehicle must be within range of the remote control!  Follow steps 1, 2, and 3 to reset timer for a new time or 
follow steps 1 & 3 only to set the timer for the same time again. 

 

To Cancel Self-Start timer: 
5.  Press and hold buttons #2 & #3 together for the following sequence: [2 beeps]-[3 beeps]-[4 beeps]. 
6.  Immediately release Buttons #2 & #3.  The Engine Icon should appear on the LCD display.